OREX™ (INDOOR/OUTDOOR)

LINE VOLTAGE | LINEAR LED LIGHTING | 2400K-6500K

SPEC SHEET

Product Description

Offering up to 500 lumens per foot, Orex is a simple indoor/outdoor line voltage solution to long run lengths requiring high output levels.

Product Features

  • 120V Line Voltage
  • Integral AC/DC Rectifier
  • ELV Dimmable
  • Triac
  • 0-10V (with LCX-1041)
  • Hardwire or Plug-in Installation
  • IP65

Technical Specifications

Model Kelvin 250 Output
Lumens
500 Output
Lumens
RX-24K 2400K 223 lm/ft 444 lm/ft
RX-27K 2700K 249 lm/ft 497 lm/ft
RX-30K 3000K 255 lm/ft 509 lm/ft
RX-35K 3500K 263 lm/ft 524 lm/ft
RX-40K 4000K 268 lm/ft 535 lm/ft
RX-50K 5000K 275 lm/ft 549 lm/ft
RX-65K 6500K 278 lm/ft 555 lm/ft

Watts per Foot

Model RX—OREX (Indoor/Outdoor)
Input Voltage 120V AC
Watts per Foot 250 lm/ft = 3W/ft
500 lm/ft = 6W/ft
Beam Spread 120°
Max Run Length 250 lm/ft = 120ft per Power Feed
500 lm/ft = 100ft per Power Feed
Length Increments 3″ (76mm)
End Cap Dimensions 0.75″ (19mm) × 0.375″ (10mm) × 1.063″ (27mm)
Tape Dimensions 0.625″ (15.5mm) × 0.25″ (6.5mm)
CRI 90+
Diode 3056
Dimming Options ELV, Triac, 0-10V*
Temp Range -22ºF (-30ºC) to 122ºF (50ºC)

*0-10V Dimmable with Optional LCX-1041 Module

Product Dimensions

Available Options

FACTORY INSTALLED HARDWIRE POWER FEED
Specify 72″ or 240″ length in component builder.


FACTORY INSTALLED PLUG-IN POWER FEED
Specify 72″ or 144″ length in component builder.


FACTORY INSTALLED JUMP CABLES (CONSULT FACTORY FOR CONFIGURATION)
Availabe in 6″, 24″, and 48″ cable lengths.


Available Options

FLAT ALUMINUM CHANNEL

Model RX-CH-TL-2-FL
Channel Material Aluminum
Lens Material Acrylic
Length 78.74″ (2m)
Width 0.813″ (20mm)

Included with Aluminum Channel

Length2.92″ (74.23mm)1.27″ (32.25mm)Width1.52″ (38.82mm)1.52″ (38.82mm)

Model RX-EC-FL-SD
Start Cap Finish Cap
Height 0.88″ (22.5mm) 0.88″ (22.5mm)

SQUARE ALUMINUM CHANNEL

Model RX-CH-TL-2-SQ
Channel Material Aluminum
Lens Material Acrylic
Length 78.74″ (2m)
Width 0.813″ (20mm)

Included with Aluminum Channel

Length2.92″ (74.23mm)1.27″ (32.25mm)Width1.52″ (38.82mm)1.52″ (38.82mm)

Model RX-EC-SQ-SD
Start Cap Finish Cap
Height 1.26″ (32mm) 1.26″ (32mm)

PLASTIC MOUNTING BASE

Model RX-CH-PL-2M
Material Polycarbonate
Length 78.74″ (2m)
Width 0.75″ (18.9mm)
Height 0.438″ (14.3mm)

MOUNTING CLIPS (10 PER PACK)

Model RX-CLP-F1-PAK-P
Material Polycarbonate
Length 0.563″ (15mm)
Width 0.78″ (19.8mm)
Height 0.44″ (11.3mm)

45° MOUNTING CLIPS (10 PER PACK)

Model RX-CLP-A1-PAK-P
Material ABS Plastic
Length 0.78″ (19.7mm)
Width 0.97″ (24.7mm)
Height 0.87″ (22mm)

90° MOUNTING CLIPS (10 PER PACK)

Model RX-CLP-V1-PAK-P
Material ABS Plastic
Length 0.77″ (19.6mm)
Width 0.52″ (13.3mm)
Height 0.92″ (23.3mm)

Product Description

Create uniform, suspended lines of light without the hassle of cable suspension.

Dimensions

Ordering Information